Evertech Publish

Build feed

suspension ✕ clear tag

1.jpg
This is a pierce fire engine that is fully functioning. [no water]. Has many compartments, all are emty for you. The ladder on the back: press the buttons under it left to right, then right to left. The cab: there is a compartment in the cab. There are so many buttons that some driver functions are on the passenger seat. The pump panel: to work the pump panel there are some things you need to know. 1: all button colors correspond to an output. (Except for deck gun) 2: the two bright blue buttons at the top right are your tank to pump and tank fill/recirculate 3: the dark red button is for the deck gun 4: the buttons that dont move are called bleeder valves. They control water pressure and take the air out of water intakes like hydrants. These correspond to the intake of that color. 5: if you don’t see the output for the button it is either a crosslay/preconnect or the deck gun. 6: to turn on the pump press the last switch on the driver seat. 7: to turn on the engine press the switch above the driver seat. Lowering the truck and squating it: this engine has a unique function that makes the back lower: 1: go to the back tires and break the 4 blocks around them (two on either side of each tire). To unsquat (raise) your truck: 1: find the engineer/operator/drivers compartment (the first one behind the pump panel on the drivers side. 2: open the door of the compartment and press the switch on the inside of the compartment door. 3: lift the truck on your remote control and drop it when in mid air. 4: replace the 4 blocks on the sides of the wheels (if this is not possible, try step number 3 again.) 5: turn off the switch on the inside of the engineer/operator/drivers compartment door. Everything has its place there is room for a ladder in a back compartment and a hard suction tube can be put in the lower compartment in the back.
mechanicalrealisticsuspensiontruck
Open build
10-16-2026--08-07_6_ets.txt
Anonymous 6 days ago